Order Details

Prototype or Sample Orders

If you are testing your design to make sure the spring or wire form is going to function as designed, you will need to place a prototype or sample order.  This will give you time to test the prototype.  You may decide to place another prototype order to test design changes (such as material type, wire diameter, load or force, or number of bends).

First Piece Sample Approval Before Running Entire Order

If you want to verify that we can make your part per your print before we run the entire order, we can send you 5 to 10 parts (without plating) and the first piece inspection report.  You can inspect the samples to verify they match the print, and then call us back the same day you received the samples to give us approval to run the order.  This way, we hold the machine for less than 24 hours while the parts are delivered to you.  If you will need more than 1 day to approve samples, you should place an order for prototypes or samples.

Any design changes after seeing samples may result in additional charges.  For example, if your design change can be handled by a small change in material feed length, there most likely would be no extra charge.  If you decide to change material type, wire diameter, load or force, or number of bends, any of these significant design changes most likely would result in an extra charge

Credit Terms

Credit approval is required for all customers.

To establish credit with Master Spring & Wire Form Co., please complete our credit application. Contact our accounting department at (708) 453-2570 with any questions.

The application should include the company names, addresses, contact names, telephone and fax numbers of your bank and at least three trade references.  Also include your bank account number.  Please have an authorized representative of your company sign the application giving approval to your bank to release credit information.

We will notify you when your credit is approved.